-- *********************************************************************
-- CISCO-IP-LOCAL-POOL-MIB.my: Cisco IP Local Pool MIB
--
-- This MIB provides configuration and statistics reflecting the
-- allocation of Local IP Pools.
--
-- December 2002, Federico Mota
--
-- Copyright (c) 2002-2005 by Cisco Systems, Inc.
-- All rights reserved.
-- *********************************************************************
--CISCO-IP-LOCAL-POOL-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPE,
Unsigned32,Gauge32FROM SNMPv2-SMI
TEXTUAL-CONVENTION,TruthValue,RowStatusFROM SNMPv2-TC
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUPFROM SNMPv2-CONF
InetAddressType,InetAddressFROM INET-ADDRESS-MIB
InterfaceIndexOrZeroFROM IF-MIB
SnmpAdminStringFROM SNMP-FRAMEWORK-MIB
ciscoMgmt
FROM CISCO-SMI;ciscoIpLocalPoolMIB MODULE-IDENTITYLAST-UPDATED"200501110000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"DESCRIPTION"This MIB defines the configuration and monitoring capabilities
relating to local IP pools.
Local IP pools have the following characteristics:
- An IP local pool consists of one or more IP address ranges.
- An IP pool group consists of one or more IP local pools.
- An IP local pool can only belong to one IP pool group.
- IP local pools that belong to different groups can have
overlapping addresses.
- IP local pool names are unique even when they belong to
different groups.
- Addresses within an IP pool group can not overlap.
- IP local pools without an explicit group name are considered
members of the base system group. In this MIB, the base
system group is represented by a null IP pool group name.
This MIB defines objects that expose the relationship between
IP pool groups and IP local pools. There exist other objects
that maintain statistics about the address usage of IP local
pools."REVISION"200501110000Z"DESCRIPTION"Added two objects to the cIpLocalPoolStatsTable:
- cIpLocalPoolPercentAddrThldLo
- cIpLocalPoolPercentAddrThldHi
Added two notifications:
- cilpPercentAddrUsedHiNotif
- cilpPercentAddrUsedLoNotif"REVISION"200304032000Z"DESCRIPTION"Initial version of this MIB module."::={ ciscoMgmt 326}CIpLocalPoolName ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"A non-empty string that uniquely identifies an IP local pool."SYNTAXOCTETSTRING(SIZE(1..48))
CIpLocalPoolGroupNameOrNull ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"A string that uniquely identifies an IP pool group. The value
of null is object-specific and must therefore be defined as part
of the description of any object which uses this syntax."SYNTAXOCTETSTRING(SIZE(0..48))CIpLocalPoolPercentage ::=TEXTUAL-CONVENTIONDISPLAY-HINT"d-2"STATUScurrentDESCRIPTION"A percentage associated with the addresses used in a IP local
pool."SYNTAXGauge32(0..100)
ciscoIpLocalPoolMIBNotifs OBJECTIDENTIFIER::={ ciscoIpLocalPoolMIB 0}ciscoIpLocalPoolMIBObjects OBJECTIDENTIFIER::={ ciscoIpLocalPoolMIB 1}ciscoIpLocalPoolMIBConform OBJECTIDENTIFIER::={ ciscoIpLocalPoolMIB 2}cIpLocalPoolConfig OBJECTIDENTIFIER::={ ciscoIpLocalPoolMIBObjects 1}cIpLocalPoolGroup OBJECTIDENTIFIER::={ ciscoIpLocalPoolMIBObjects 2}cIpLocalPoolStats OBJECTIDENTIFIER::=
{ ciscoIpLocalPoolMIBObjects 3}-- ConfigcIpLocalPoolNotificationsEnable OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"An indication of whether the notifications defined by the
ciscoIpLocalPoolNotifGroup are enabled."::={ cIpLocalPoolConfig 1}cIpLocalPoolConfigTable OBJECT-TYPESYNTAXSEQUENCEOF CIpLocalPoolConfigEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table manages the creation, modification, and deletion
of IP local pools using the RowStatus textual convention. An
entry in this table defines an IP address range that is
associated with an IP local pool.
A conceptual row in this table can not be modified while
cIpLocalPoolRowStatus is set to 'active'.
Since IP local pool names are unique even when they belong to
different groups, and addresses within a group can not overlap,
a row in this table is uniquely indexed by the pool name, and by
the low address of the IP local pool together with its address
type."::={ cIpLocalPoolConfig 2}cIpLocalPoolConfigEntry OBJECT-TYPESYNTAX CIpLocalPoolConfigEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry provides information about a particular IP local
pool, including the number of free and used addresses."INDEX{ cIpLocalPoolName, cIpLocalPoolAddrType,
cIpLocalPoolAddressLo }::={ cIpLocalPoolConfigTable 1}
CIpLocalPoolConfigEntry ::=SEQUENCE{
cIpLocalPoolName CIpLocalPoolName,
cIpLocalPoolAddrType InetAddressType,
cIpLocalPoolAddressLo InetAddress,
cIpLocalPoolAddressHi InetAddress,
cIpLocalPoolFreeAddrs Gauge32,
cIpLocalPoolInUseAddrs Gauge32,
cIpLocalPoolGroupContainedIn CIpLocalPoolGroupNameOrNull,
cIpLocalPoolRowStatus RowStatus}cIpLocalPoolName OBJECT-TYPESYNTAX CIpLocalPoolName
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An arbitrary non-empty string that uniquely identifies the IP
local pool. This name must be unique among all the local IP
pools even when they belong to different pool groups."::={ cIpLocalPoolConfigEntry 1}cIpLocalPoolAddrType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object specifies the address type of cIpLocalPoolAddressLo
and cIpLocalPoolAddressHi."::={ cIpLocalPoolConfigEntry 2}cIpLocalPoolAddressLo OBJECT-TYPESYNTAXInetAddressMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object specifies the first IP address of the range of IP
addresses contained by this pool entry. The address type of
this object is described by cIpLocalPoolAddrType.
This address must be less than or equal to the address in
cIpLocalPoolAddressHi."::={ cIpLocalPoolConfigEntry 3}cIpLocalPoolAddressHi OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object specifies the last IP address of the range of IP
addresses mapped by this pool entry. The address type of this
object is described by cIpLocalPoolAddrType. If only a single
address is being mapped, the value of this object is equal to
the value of cIpLocalPoolAddressLo."::={ cIpLocalPoolConfigEntry 4}cIpLocalPoolFreeAddrs OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The number of IP addresses available for use in the range of
IP addresses."::={ cIpLocalPoolConfigEntry 5}cIpLocalPoolInUseAddrs OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of IP addresses being used in the range of IP
addresses."::={ cIpLocalPoolConfigEntry 6}cIpLocalPoolGroupContainedIn OBJECT-TYPESYNTAX CIpLocalPoolGroupNameOrNull
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object relates an IP local pool to its IP pool group.
A null string indicates this IP local pool is not contained in a
named IP pool group, but that it is contained in the base IP
pool group. An IP local pool can only belong to one IP pool
group."DEFVAL{""}::={ cIpLocalPoolConfigEntry 7}cIpLocalPoolRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object facilitates the creation, or deletion of a
conceptual row in this table."::={ cIpLocalPoolConfigEntry 8}-- GroupcIpLocalPoolGroupContainsTable OBJECT-TYPESYNTAXSEQUENCEOF CIpLocalPoolGroupContainsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table which exposes the container/'containee' relationships
between local IP pools and IP pool groups.
Entries in this table are created or deleted as a by-product of
creating or deleting entries in the cIpLocalPoolConfigTable.
When an entry is created and activated in the
cIpLocalPoolConfigTable table, an entry in this table will come
into existence if it does not already exist.
When an entry is deleted in the cIpLocalPoolConfigTable table,
if there is no other entry existing in that table with the same
cIpLocalPoolGroupContainedIn and cIpLocalPoolName, the entry in
this table with the respective cIpLocalPoolGroupName and
cIpLocalPoolName indices will be removed."::={ cIpLocalPoolGroup 1}cIpLocalPoolGroupContainsEntry OBJECT-TYPESYNTAX CIpLocalPoolGroupContainsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry describes single container/'containee'
relationship.
Pool names can only be associated with one group. Pools carry
implicit group identifiers because pool names can only be
associated with one group. An entry in this table describes
such an association."INDEX{ cIpLocalPoolGroupName, cIpLocalPoolChildIndex }::={ cIpLocalPoolGroupContainsTable 1}
CIpLocalPoolGroupContainsEntry ::=SEQUENCE{
cIpLocalPoolGroupName CIpLocalPoolGroupNameOrNull,
cIpLocalPoolChildIndex CIpLocalPoolName
}cIpLocalPoolGroupName OBJECT-TYPESYNTAX CIpLocalPoolGroupNameOrNull
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"A unique group name that identifies the IP pool group. The
null string represents the base IP pool group."::={ cIpLocalPoolGroupContainsEntry 1}cIpLocalPoolChildIndex OBJECT-TYPESYNTAX CIpLocalPoolName
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The value of cIpLocalPoolName for the contained IP local pool."::={ cIpLocalPoolGroupContainsEntry 2}cIpLocalPoolGroupTable OBJECT-TYPESYNTAXSEQUENCEOF CIpLocalPoolGroupEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table provides statistics for configured IP pool groups.
Entries in this table are created as the result of adding a new
IP pool group to the cIpLocalPoolConfigTable.
Entries in this table are deleted as the result of removing all
IP local pools that are contained in an IP pool group in the
cIpLocalPoolConfigTable.
An entry in this table is uniquely indexed by IP pool group
name."::={ cIpLocalPoolGroup 2}cIpLocalPoolGroupEntry OBJECT-TYPESYNTAX CIpLocalPoolGroupEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry provides information about a particular IP pool
group and the number of free and used addresses in an IP pool
group."INDEX{ cIpLocalPoolGroupName }::={ cIpLocalPoolGroupTable 1}
CIpLocalPoolGroupEntry ::=SEQUENCE{
cIpLocalPoolGroupFreeAddrs Gauge32,
cIpLocalPoolGroupInUseAddrs Gauge32}cIpLocalPoolGroupFreeAddrs OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of IP addresses available for use in the IP pool
group."::={ cIpLocalPoolGroupEntry 1}cIpLocalPoolGroupInUseAddrs OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of IP addresses that have been allocated from the
IP pool group."
::={ cIpLocalPoolGroupEntry 2}-- StatscIpLocalPoolStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CIpLocalPoolStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table providing statistics for each IP local pool.
Entries in this table are created as the result of adding a new
IP local pool to the cIpLocalPoolConfigTable.
Entries in this table are deleted as the result of removing all
the address ranges that are contained in an IP local pool in the
cIpLocalPoolConfigTable.
Entries in this table are uniquely indexed by the name of the IP
local pool."::={ cIpLocalPoolStats 1}cIpLocalPoolStatsEntry OBJECT-TYPESYNTAX CIpLocalPoolStatsEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"Each entry provides statistical information about a particular
IP local pool, and the total number of free and used addresses
of all the ranges in an IP local pool."INDEX{ cIpLocalPoolName }::={ cIpLocalPoolStatsTable 1}
CIpLocalPoolStatsEntry ::=SEQUENCE{
cIpLocalPoolStatFreeAddrs Gauge32,
cIpLocalPoolStatInUseAddrs Gauge32,
cIpLocalPoolStatHiWaterUsedAddrs Unsigned32,
cIpLocalPoolStatInUseAddrThldLo Unsigned32,
cIpLocalPoolStatInUseAddrThldHi Unsigned32,
cIpLocalPoolPercentAddrThldLo CIpLocalPoolPercentage,
cIpLocalPoolPercentAddrThldHi CIpLocalPoolPercentage
}cIpLocalPoolStatFreeAddrs OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of IP addresses available for use in this IP local
pool."::={ cIpLocalPoolStatsEntry 1}cIpLocalPoolStatInUseAddrs OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of IP addresses being used in this IP local pool."::={ cIpLocalPoolStatsEntry 2}cIpLocalPoolStatHiWaterUsedAddrs OBJECT-TYPESYNTAXUnsigned32
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object contains the high water mark of used addresses
in an IP local pool since pool creation, since the system was
restarted, or since this object was reset, whichever occurred
last. This object can only be set to zero, and by doing so, it
is reset to the value of cIpLocalPoolStatInUseAddrs.
Since the number of addresses in a pool can be reduced (e.g. by
deleting one of its ranges), the value of this object may be
greater than the sum of cIpLocalPoolStatFreeAddrs and
cIpLocalPoolStatInUseAddrs."::={ cIpLocalPoolStatsEntry 3}cIpLocalPoolStatInUseAddrThldLo OBJECT-TYPESYNTAXUnsigned32(0..4294967295)MAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"When the number of used addresses in an IP local pool falls
below this threshold value, the ciscoIpLocalPoolInUseAddrNoti
notification will be rearmed.
The value of this object should never be greater than the value
of cIpLocalPoolStatInUseAddrThldHi."DEFVAL{0}::={ cIpLocalPoolStatsEntry 4}cIpLocalPoolStatInUseAddrThldHi OBJECT-TYPESYNTAXUnsigned32(0..4294967295)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"When the number of used addresses in an IP local pool
is equal or exceeds this threshold value, a
ciscoIpLocalPoolInUseAddrNoti notification will be generated.
Once this notification is generated, it will be disarmed and it
will not be generated again until the number of used address
falls below the value indicated by
cIpLocalPoolStatInUseAddrThldLo.
The value of this object should never be smaller than the value
of cIpLocalPoolStatInUseAddrThldLo."DEFVAL{4294967295}::={ cIpLocalPoolStatsEntry 5}cIpLocalPoolPercentAddrThldLo OBJECT-TYPESYNTAX CIpLocalPoolPercentage
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"When the percentage of used addresses in an IP local pool
falls below this threshold value, a cilpPercentAddrUsedLoNotif
notification will be generated. Once the notification is
generated, it will be disarmed and it will not be generated
again until the number of used addresses equals or exceeds the
value indicated by cIpLocalPoolPercentAddrThldHi.
The value of this object should never be greater than the value
of cIpLocalPoolPercentAddrThldHi."DEFVAL{0}::={ cIpLocalPoolStatsEntry 6}cIpLocalPoolPercentAddrThldHi OBJECT-TYPESYNTAX CIpLocalPoolPercentage
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"When the percentage of used addresses in an IP local pool
is equal or exceeds this threshold value, a
cilpPercentAddrUsedHiNotif notification will be generated. Once
the notification is generated, it will be disarmed and it will
not be generated again until the number of used addresses falls
below the value indicated by cIpLocalPoolPercentAddrThldLo.
The value of this object should never be smaller than the value
of cIpLocalPoolPercentAddrThldLo."DEFVAL{100}
::={ cIpLocalPoolStatsEntry 7}cIpLocalPoolAllocTable OBJECT-TYPESYNTAXSEQUENCEOF CIpLocalPoolAllocEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table lists all addresses that have been allocated out of
an IP local pool.
Entries in this table are created when a remote peer allocates
an address from one of the IP local pools in the
cIpLocalPoolConfigTable.
Entries in this table are deleted when a remote peer deallocates
an address from one of the IP local pool in the
cIpLocalPoolConfigTable.
Entries in this table are uniquely indexed by the name of the IP
local pool, and the allocated address, together with its address
type."::={ cIpLocalPoolStats 2}cIpLocalPoolAllocEntry OBJECT-TYPE
SYNTAX CIpLocalPoolAllocEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry refers to conceptual row that associates an IP
addresses with the interface where the request was received, and
the user that requested the address."INDEX{ cIpLocalPoolName, cIpLocalPoolAllocAddrType,
cIpLocalPoolAllocAddr }::={ cIpLocalPoolAllocTable 1}
CIpLocalPoolAllocEntry ::=SEQUENCE{
cIpLocalPoolAllocAddrType InetAddressType,
cIpLocalPoolAllocAddr InetAddress,
cIpLocalPoolAllocIfIndex InterfaceIndexOrZero,
cIpLocalPoolAllocUser SnmpAdminString
}cIpLocalPoolAllocAddrType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object specifies the address type of
cIpLocalPoolAllocAddr."::={ cIpLocalPoolAllocEntry 1}cIpLocalPoolAllocAddr OBJECT-TYPESYNTAXInetAddressMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object specifies the allocated IP address. The address
type of this object is described by cIpLocalPoolAllocAddrType."::={ cIpLocalPoolAllocEntry 2}cIpLocalPoolAllocIfIndex OBJECT-TYPE
SYNTAXInterfaceIndexOrZeroMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the interface from which the allocation
message was sent.
In the case that the interface can not be determined, the value
of this object will be zero."::={ cIpLocalPoolAllocEntry 3}cIpLocalPoolAllocUser OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the user name of the person from whom the
allocation message was sent.
In the case that the user name can not be determined, the value
of this object will the null string."::={ cIpLocalPoolAllocEntry 4}
-- NotificationsciscoIpLocalPoolInUseAddrNoti NOTIFICATION-TYPEOBJECTS{ cIpLocalPoolStatFreeAddrs,
cIpLocalPoolStatInUseAddrs }STATUScurrentDESCRIPTION"A notification indicating that number of used addresses of an
IP local pool exceeded the threshold value indicated by
cIpLocalPoolStatInUseAddrThldHi."::={ ciscoIpLocalPoolMIBNotifs 1}cilpPercentAddrUsedLoNotif NOTIFICATION-TYPEOBJECTS{ cIpLocalPoolStatFreeAddrs,
cIpLocalPoolStatInUseAddrs }STATUScurrentDESCRIPTION"A notification indicating that the percentage of used addresses
of an IP local pool went below the threshold value indicated by
cIpLocalPoolPercentAddrThldLo."::={ ciscoIpLocalPoolMIBNotifs 2}cilpPercentAddrUsedHiNotif NOTIFICATION-TYPEOBJECTS{ cIpLocalPoolStatFreeAddrs,
cIpLocalPoolStatInUseAddrs }STATUScurrentDESCRIPTION"A notification indicating that the percentage of used addresses
of an IP local pool is equal to or exceeds the threshold value
indicated by cIpLocalPoolPercentAddrThldHi."::={ ciscoIpLocalPoolMIBNotifs 3}-- ConformanceciscoIpLocalPoolMIBCompliances OBJECTIDENTIFIER::={ ciscoIpLocalPoolMIBConform 1}ciscoIpLocalPoolMIBGroups OBJECTIDENTIFIER::=
{ ciscoIpLocalPoolMIBConform 2}ciscoIpLocalPoolMIBCompliance MODULE-COMPLIANCESTATUSdeprecated-- by ciscoIpLocalPoolMIBCompliance1DESCRIPTION"The compliance statement for entities which implement the Cisco
IP Local Pool MIB."MODULE-- this moduleMANDATORY-GROUPS{
ciscoIpLocalPoolConfigGroup,
ciscoIpLocalPoolStatsGroup
}GROUP ciscoIpLocalPoolGroupGroup
DESCRIPTION"This group is optional."OBJECT cIpLocalPoolAddressHi
MIN-ACCESSread-onlyDESCRIPTION"Create/Write access is optional."OBJECT cIpLocalPoolGroupContainedIn
MIN-ACCESSread-only
DESCRIPTION"Create/Write access is optional."OBJECT cIpLocalPoolRowStatus
MIN-ACCESSread-onlyDESCRIPTION"Create/Write access is optional."::={ ciscoIpLocalPoolMIBCompliances 1}ciscoIpLocalPoolMIBCompliance1 MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities which implement the Cisco
IP Local Pool MIB."MODULE-- this moduleMANDATORY-GROUPS{
ciscoIpLocalPoolConfigGroup,
ciscoIpLocalPoolStatsGroup,
ciscoIpLocalPoolNotifGroup
}GROUP ciscoIpLocalPoolGroupGroup
DESCRIPTION
"This group is optional."GROUP ciscoIpLocalPoolStatsGroupSup1
DESCRIPTION"This group is optional."GROUP ciscoIpLocalPoolNotifGroupSup1
DESCRIPTION"This group is optional."OBJECT cIpLocalPoolAddressHi
MIN-ACCESSread-onlyDESCRIPTION"Create/Write access is optional."OBJECT cIpLocalPoolGroupContainedIn
MIN-ACCESSread-onlyDESCRIPTION"Create/Write access is optional."OBJECT cIpLocalPoolRowStatus
MIN-ACCESSread-onlyDESCRIPTION"Create/Write access is optional."::={ ciscoIpLocalPoolMIBCompliances 2}
-- Units of ConformanceciscoIpLocalPoolConfigGroup OBJECT-GROUPOBJECTS{
cIpLocalPoolNotificationsEnable,
cIpLocalPoolAddressHi,
cIpLocalPoolFreeAddrs,
cIpLocalPoolInUseAddrs,
cIpLocalPoolGroupContainedIn,
cIpLocalPoolRowStatus
}STATUScurrentDESCRIPTION"Objects for providing configuration for IP local pools."::={ ciscoIpLocalPoolMIBGroups 1}ciscoIpLocalPoolGroupGroup OBJECT-GROUPOBJECTS{
cIpLocalPoolChildIndex,
cIpLocalPoolGroupFreeAddrs,
cIpLocalPoolGroupInUseAddrs
}STATUScurrentDESCRIPTION
"Objects for providing configuration for IP local pools."::={ ciscoIpLocalPoolMIBGroups 2}ciscoIpLocalPoolStatsGroup OBJECT-GROUPOBJECTS{
cIpLocalPoolStatFreeAddrs,
cIpLocalPoolStatInUseAddrs,
cIpLocalPoolStatHiWaterUsedAddrs,
cIpLocalPoolStatInUseAddrThldLo,
cIpLocalPoolStatInUseAddrThldHi,
cIpLocalPoolAllocIfIndex,
cIpLocalPoolAllocUser
}STATUScurrentDESCRIPTION"Objects for providing IP local pool statistics and status."::={ ciscoIpLocalPoolMIBGroups 3}ciscoIpLocalPoolNotifGroup NOTIFICATION-GROUPNOTIFICATIONS{
ciscoIpLocalPoolInUseAddrNoti }STATUScurrentDESCRIPTION"The collection of notifications used for monitoring IP local
pool utilization."::={ ciscoIpLocalPoolMIBGroups 4}ciscoIpLocalPoolStatsGroupSup1 OBJECT-GROUPOBJECTS{
cIpLocalPoolPercentAddrThldLo,
cIpLocalPoolPercentAddrThldHi
}STATUScurrentDESCRIPTION"Supplemental objects for providing IP local pool statistics and
status."::={ ciscoIpLocalPoolMIBGroups 5}ciscoIpLocalPoolNotifGroupSup1 NOTIFICATION-GROUPNOTIFICATIONS{
cilpPercentAddrUsedLoNotif,
cilpPercentAddrUsedHiNotif
}STATUScurrentDESCRIPTION"The collection of suplemantal notifications used for monitoring
IP local pool utilization."::={ ciscoIpLocalPoolMIBGroups 6}END